Home /

GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear

Send your message to this supplier
*From:
Your email address is incorrect!
To:Guangzhou Changfeng Steel Co., LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
Your message must be between 20-3,000 characters!
Yes!I would like your verified suppliers matching service!
Buy cheap GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear from wholesalers
  • Buy cheap GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear from wholesalers
  • Buy cheap GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear from wholesalers

GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear

Ask Latest Price
Brand Name:CF STEEL
Model Number:40CrNiMoA, AISI4340,39CrNiMO,40NiCRMo22,SNCM439
Certification:ISO, Mill Certificate
Price:USD800-900/MT
Payment Terms:L/C, T/T
Supply Ability:1000t/Month
Delivery Time:7-15 days
Company Data
Active Member
Contact Person Echo
Business Type: +8618520152629-020-8251-5856
Business Type: Distributor/Wholesaler Exporter Trading Company
Officials: 广州市黄埔区大沙地东路403号B802房(仅限办公)
Quality: Quality Certifitation Available
Product Details Company Profile
Product Details
China Forging Steel Bars 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | SNCM439

1.36CrNiMo4 AISI 4340 forged steel bar sizes we can offer;
Round bar: 200-1000mm
Square bar:150×150-600×600mm

2.Supply condition for 36CrNiMo4 AISI 4340 Forged steel bars:Black /Rough Machined /Rough turned

3.36CrNiMo4 AISI 4340 Forged Steel round bar tolerance:
Black surface
Forged sizes up to 500mm (-0/+5mm)
Forged sizes above 500mm in diameter (-0/+8mm)
Machined surface to all sizes (-0/+3mm)

4.Futhur heat treatment for 36CrNiMo4 AISI 4340 forged steel :
Normalized
Annealed
Q&T(Quenched&Tempered)

5.36CrNiMo4 AISI 4340 Steel Equivalent
CountryUSABritainBritainJapan
StandardASTM A29EN 10250BS 970JIS G4103
Grades434036CrNiMo4/EN24/817M40SNCM 439/SNCM8
1.6511

6.36CrNiMo4 AISI 4340 Forged steel chemical composition
C%Carbon 0.38 - 0.43
Mn%Manganese 0.6 - 0.8 max
P%Phosphorus 0.035 max
S%Sulfur 0.040 max
Si%Silicon 0.15 - 0.3
Ni%Nickel 1.65 - 2.0
Cr%Chromium 0.7 - 0.9
Mo%Molybdenum 0.2 - 0.3

7.36CrNiMo4 AISI 4340 Forged steel Application
AISI 4340 steel is used in most industry sectors for applications requiring higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:

Aircraft Landing Gear
Automotive,
Oil and Gas Drilling,
Forging,
Warm and Cold Forming,
Machine Building,
Transfer Systems, like power transmission gears and shafts.
General engineering industries and structural use applications, such as: heavy duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.

8.Quality control:
1. Melting Process: EAF/BOF+LF+VD resulting in ingots
2. Both ends cut by saw
3. Ratio of forging:minimum 3:1
4. Grain size of final product: according to ASTM E112 more than 5,preferred more than 8
5. Ultrasonic test: As per SEP1921 Class C/c or D/d

9.Heat treatment of 36CrNiMo4 AISI 4340Steel

HEAT TREATMENT
Heat treatment after forging is carried out to render the steel suitable for machining, and to meet the mechanical property limits specified for the steel's particular applications. There are several ways to heat treat a given steel part and it is only through practice that the optimum temperature and conditions may be defined. The following information should be taken as a guide only.

ANNEALING
To obtain a pearlitic structure on certain parts for machining, 4340 should be annealed at a nominal temperature of 1525 º F (830 º C,) cooling to 1350 º F (730 º C) and furnace cooling to 1130 º F (610 º C) at a rate of 20 º F (11 º C) per hour, then air cooling. This process, known as full annealing, is very time consuming as it involves slow cooling over the entire temperature range from the austenitizing temperature to a temperature well below that at which transformation is complete.

To obtain a spheroidized structure in 4340 grade involves austenitizing at 1380 º F (750 º C,) furnace cooling to 1300 º F (705 º C) then to 1050 º F (565 º C) at a rate of 5 º F (3 º C) per hour. This structure will probably result in better machinability than will the coarse lamellar pearlite structure obtained by the full anneal process.

NORMALIZING
This process is defined as heating a steel to a temperature above the ferrite to austenite transformation temperature, then cooling in air to a temperature well below this transformation temperature. The treatment may be carried out on forged products as a conditioning treatment prior to final heat treatment. Normalizing also serves to refine the structure of forgings that might have cooled non-uniformly from their forging operation. The nominal normalizing temperature for 4340 grade is 1500 º F (815 º C,) but production experience may necessitate a temperature either 50 º F (10 º C) above or below this temperature. . As a rule of thumb, when forgings are normalized before, say, carburizing or hardening and tempering, the upper range of normalizing temperatures is used. When normalizing is the final heat treatment, the lower temperature range is used.

HARDENING
This heat treatment results in the formation of martensite after quenching, resulting in increased hardness and tensile strength. A temperature range of 1500 - 1550 º F (815 - 845 º C) is the normal austenitizing temperature for direct hardening of 4340 grade. Oil quenching is normally used for 4340 as the alloy's hardenability is suited to this quenching method.

TEMPERING
Tempering is carried out to relieve stresses from the hardening process, but primarily to obtain mechanical properties required for the final application. The actual tempering temperature will be chosen to meet the required properties, and in many cases will be a matter of trial and error.

10.MOQ: one piece per size/grade

11.Payment term: FOB CIF CFR EXW and so on

12.Delivery time : 7 to 30 days after deposit received.

GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear
GB 4340 Steel Bar 36CrNiMo4 1.6511 EN24 SNCM439 For Aircraft Landing Gear
Changfeng Tool & Die Steel main product:
STANDARD/GRADE of steelFlat Bar Size(mm)Round bar Size(mm)Technics
DINAISMJISGB(China)ThicknessWidthLengthDiameterLength
1.121SAE1050S50C50#10-450155-22002000-12000Forged, Hot Rolled
1.2311P20PDS-33Cr2Mo10-460155-22002000-1000020-2002000-6000
1.2738P20+Ni-3Cr2NiMnMo21-300155-22002000-800020-2002000-6000
1.2379D2SKD10SKD1010-200155-8102000-600014-803000-6000
1.2080D3SKD13Cr2Mo10-200155-8102000-600020-2003000-6000
1.2083420-4Cr1310-500155-12002000-600012-3003000-6000
1.2344H13SKD614Cr5MoSiV110-500155-16002000-600016-4003000-6000
1.2510O1SKS39CrWMn10-200155-8102000-600020-2003000-6000
1.7225SAE4140SCM44042CrMo10-280155-22002000-600016-4503000-6000


About Us
Guangzhou Changfeng Steel Co., Ltd.
is a professional special steel company, which specializing in this line in China since 2005. Our main products are Plastic Mould Steel, Hot Work Mould Steel, Cold Work Mould Steel, Alloy Structural Steel, Tool Steel, Stainless Steel, Carbon Steel and Forged Block.


To ensure provide high quality products to customers, we have close cooperation with many Chinese first class special steel enterprises, including Baosteel Group, Dongbei Special Steel, Changcheng Special Steel, Hongsheng Heavy Industry, Xingcheng Special Steel and Daye Special Steel.


Send your message to this supplier
*From:
Your email address is incorrect!
*To:

Guangzhou Changfeng Steel Co., LTD

*Subject:
Your subject must be between 10-255 characters!
*Message:
Your message must be between 20-3,000 characters!
Characters Remaining : (0/3000)

You May Like

China P20+S / 1.2312 Special Tool Steel Plate & Block For Plastic Mould wholesale

P20+S / 1.2312 Special Tool Steel Plate & Block For Plastic Mould

China EN24 4340 1.6511 Alloy Tool Steel Round Bar For Vane With Diameter 20-100mm wholesale

EN24 4340 1.6511 Alloy Tool Steel Round Bar For Vane With Diameter 20-100mm

China AISI 4130 Alloy Tool Steel Round Bar For Mechanical With Length 3000-6000mm wholesale

AISI 4130 Alloy Tool Steel Round Bar For Mechanical With Length 3000-6000mm

China Forging Tool Steel Round Bar EN24 4340 1.6511 For Vane With Dia. 20-100mm wholesale

Forging Tool Steel Round Bar EN24 4340 1.6511 For Vane With Dia. 20-100mm

China AISI 4130 Forging Tool Steel Bar For Mechanical With Length 3000-6000mm wholesale

AISI 4130 Forging Tool Steel Bar For Mechanical With Length 3000-6000mm

China Hot Rolled Alloy Steel Round Bar 1.2343 / H11 / SKD6 With Length 3000-6000mm wholesale

Hot Rolled Alloy Steel Round Bar 1.2343 / H11 / SKD6 With Length 3000-6000mm

China Heat Resistance Hot Work Die Steel Round Rod Diameter 16-200mm wholesale

Heat Resistance Hot Work Die Steel Round Rod Diameter 16-200mm

China SCM440 SAE4140 Durable Forged Special Tool Steel Annealing Or Q/T Heat Treatment wholesale

SCM440 SAE4140 Durable Forged Special Tool Steel Annealing Or Q/T Heat Treatment

China Durable SKS3 1.2510 O1 Special Tool Steel Flat Plate With Length 3-6m wholesale

Durable SKS3 1.2510 O1 Special Tool Steel Flat Plate With Length 3-6m

China Mechanical SCM440 SAE4140 1.7225 Prehardened Alloy Flat Steel wholesale

Mechanical SCM440 SAE4140 1.7225 Prehardened Alloy Flat Steel

China 40X 40Cr 41Cr4 SCr440 Normalized Annealed Forged Round Bar 5140 Q+T Heat Treatment wholesale

40X 40Cr 41Cr4 SCr440 Normalized Annealed Forged Round Bar 5140 Q+T Heat Treatment

Inquiry Cart 0