Hot Rolled Plastic Mold Steel Flat Bar AISI 420 DIN1.2083 JIS S136 GB GCR13

Pre-hardened Plastic Mold Steel Flat Bar AISI 420 DIN1.2083 JIS S136 GB GCR13

Product Introduction
2083 is a tool steel in the group of plastic mold and stainless in matesitic (AISI420)So, it can stand for corrosive and can be quench to enhance it's strength together with corrosive resistance properties.Hardness can reach up to 56 HrC , this also benefit to polishing properties and can do texturing.Suitable for plastic mold that need corrosive resistance such as amino plastic,thermoplastic which has severe decompose of acitic acid as well as PVC plastic

Alloy 420 is a hardenable, martensitic stainless steel that is a modification of Alloy 410. Similar to 410, it contains a minimum of 12% chromium, just sufficient enough to give corrosion resistant properties. Alloy 420 has higher carbon content than Alloy 410 which is designed to optimize strength and hardness characteristics. It has good ductility it the annealed condition but is capable of being hardened up to Rockwell hardness 50 HRC, the highest hardness of the 12% chromium grades. Due to its hardening properties, Alloy 420 is not often welded, although it is possible. Martensitic stainless steels are designed for high hardness and sometimes other properties are to some degree compromised. Corrosion resistance is lower than the common austenitic grades and their useful operating range is limited by their loss of ductility at sub-zero temperatures and loss of strength by over-tempering at elevated temperatures. Its best corrosion resistance is achieved when the metal is hardened and surface ground or polished.

Features
Corrosive resistance
• Hardness homogeneity through all area after hardening
• High strength and tensile
• Polishing properties
• Abrasive resistance
• Machining ability
• Texturing ability
• Welding ability
Similar Standards

Chemical Composition

Heat Treatment

General Applications
2083 is in the class of stainless steel and tooling for plastic mould.Its reputation stand by the corrosive resistance properties. Rust free throughout storage period Good for mold application in high humidity, water cooling condition Suitable for any plastic mold, mold that require high corrosive such as Amino plastic, thermo plastic PVC Plastic Moreover, it can stand for abrasive and wear, so this is good for plastic thermo setting mold. Thanks to its polishing ability, it can be used for Spectacular lens, camera lens, science experimental tube, syringe.Also, good for any cutting task like knife, cutting tool, kitchen utensil, spring, seal valve or machine part for mining/wood industry. Ruler and Slider calipers
Stock Size

Sizes and Conditions
Our steel materials are in different sizes and conditions specially catered to our customers' needs. They come in round bars, flat bars, plates and blocks.
The conditions of the materials vary from pre-hardened, hot rolled,annealed, quenched and tempered to surface conditions such as black, pre-machined,griding and polish.
Why choose us?

Quality Assurance from government owned steel mills
At die & tool steel , we meticulously source materials only from steel manufacturers to ensure consistency in providing the finest quality steel products for our customers.
Being in the competitive market today, we clearly understand that customers are looking for products that are not only best in class but also affordably priced. We are confident that we are able to ful fil these two equally vital aspects –our customers' continuous support over the past two decades is the most heartfelt recognition to us.
Speedy and Timely Delivery
Knowing that delivering goods to customers' hands on time is as important as providing quality goods, we treat every business transaction as a priority. Be it a raw material or a finished material with machining or heat treatment, every effort will be made to get your purchase order to you in the shortest lead time.
Quality Commitment
In order to realise competitive products to fulfil our customers' demands and quality considerations, our integrated quality and work management system is continuously being improved and developed further. We document this for our customers by having our quality management system certified in accordance with ISO 9001. This measure is accompanied by audits and recertification's on a regularly prescribed basis.
Our service
We provide quality special steel for all industries.
Orders of any size, any length, ship fast
We carry a unique inventory of specialty special steel
Provide related value-adding services :
metal cutting, sizing, machining (blanking, milling, grinding), and heat treatment.
Sawing for small or large quantities, sawing-to-size.
Excellent customer service

Loading

Contact Us
Contact us for the latest price and more details NOW!

Guangzhou ChangFeng Steel Co., Ltd. is a professional special steel company, which specialized in exporting mould steel products based in China.With twenty years experience in special steel industry, our main products are Plastic Mould Steel, Hot Work Mould Steel, Cold Work Mould Steel, Alloy Structural Steel, Tool Steel, Stainless Steel, Carbon Steel and Forged Block.

To ensure provide high quality products to customers, we have close cooperation with many Chinese first class special steel enterprises, including Baosteel Group, Dongbei Special Steel, Changcheng Special Steel, Hongsheng Heavy Industry, Xingcheng Special Steel, Daye Special Steel. We have thousand tons of stock materials in our own factory and also can provide processing services to customers. We are full of export experience for many years, the product covers America, Germany, France, Italy, Turkey, Singapore, Thailand, Malaysia, Vietnam, Taiwan, and Middle-East.

After years of development, the company has established a complete quality management and export service system. We have a group of experienced and competent elites and is capable of offering the best service to clients. Our company equips with large-sized Vertical saw machines, Horizontal saw machines, Milling machines, Grinding machines and other advanced equipments to provide customers with cutting and other processing services. All the products should be inspected the metallographic analysis, hardness, ultrasonic flaw detection and other strict inspection processes, which meet the standards of DIN, AISI, JIS and GB to ensure their function and quality.

Our company keeps the principle of “sincerely cooperation, endless striving for perfection”. We desire to establish the long-term mutual beneficial and win-win relationship with clients all over the world.