3 In 1 Decoiler Straightener Feeder , Sheet Metal Leveling High Speed Feeder

3-in-1 feeder feeding, feeding roller, sheet metal leveling feeder

3-in-1 feeder feeding: the feeding feed arm is raised to a certain position, the rack knob is placed manually, the manual control rack is rotated forward, the material is slowly entered into the feeding arm, and the feeding material pressing arm is clamped. material.

Clicking on the touch screen feeding pull switch, forcing the material to advance to the handpiece, and controlling the material frame to rotate forward. When the material is close to the machine head, the feeding feed arm and the pressing arm are raised, and the material is pressed by the pressing arm. Relax the feed cylinder and level the cylinder to allow material to enter the machine head.

Note: The pressure arm should be kept in an automatic state, otherwise bulk material will appear.

Clamp the feed cylinder, level the cylinder, relax the feed cylinder, make the material pass the machine head, and then adjust the leveling height to clamp the feed cylinder.

Adjustment of each part of the 3-in-1 feeder head

Feed roller pressure adjustment: By adjusting the pressure regulating valve, the upper roller and the lower roller can be prevented from slipping, and the air pressure is controlled at the same time to avoid crushing the material, causing indentation or slipping.

Material Offset: If the material begins to shift incorrectly, you should immediately confirm that the mold is parallel and placed in the center of the table. The material is at right angles and centered into the leveler.

This operation can be measured by the gage. If there is a slight irregularity, it can be slowly positioned by adjusting the left and right positions of the baffle wheel.

Material leveling adjustment: material leveling principle: The leveling drum is arranged in a zigzag pattern. If the flattening roller on the inlet side is lowered, the material is bent along the drum. If the flattening roller on the outlet side is pressed too much, the material Then bend down.

Generally, the inlet side is lowered to a position where the upper and lower flattening roll gaps are 1 to 1.5 mm smaller than the material thickness, and the outlet side is adjusted to be the same as the material gap (ordinary material).

3-in-1 feeder feeding adjustment: When the above operations are completed, the feeding parameters can be set. The specific operation method can be found in the man-machine interface operation mode. After completion, it can enter normal production.

Products:

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.