Stamping Auto Decoiler Straightener Feeder Non Metallic Stamping Processing Punch Feeder

Stamping Auto Decoiler Straightener Feeder Non Metallic Stamping Processing Punch Feeder

In the stamping automation production process, the purchase of the punch feeder is mainly based on the characteristics of the stamping process, and the punching feed is selected according to the width, thickness, material and final product precision of the material to be punched. Machine equipment.

Therefore, the customer chooses the feeder should not be blind, you must first understand your needs, and then go to the targeted choice.

First of all, we must find out the material to be stamped. Whether the material is metal or non-metal, whether the material is soft or hard, whether it is easy to be scratched, and the metal material with higher hardness is the normal pull type punch feeder.

Basically all feeders can meet this requirement; soft materials, non-metallic materials, and easily scratched type materials require a special draw type feeder, that is, only air feeders or pneumatic NC feeders can be used.

Secondly, look at the brand and tonnage of the punching machine. If it is a high-speed punching machine, in order to ensure the production efficiency, the roller feeder, the clip feeder and the gear feeder should be selected. The roller feeder is mainly suitable for the production of 600 times/min or less and must be The press has an output shaft.

If the speed is exceeded, the other two should be selected. The gear feeder is mainly suitable for the double-head material frame, the S-type leveling machine, the stamping motor and the fixed rotor are special type, and the clip type feeder is the most mainstream feeding device for high-speed stamping.

Again, look at the thickness, width, and feed step requirements. If the material is above 3.5mm, only the NC feeder is suitable. If it is below 3.5mm, it needs to be combined with the material width and feed step.

Finally, it is clear whether the stamping process needs to be changed, whether it is often changed, if there is an NC feeder, it is the first choice. It has a multi-stage feeding setting and a touch screen point-controlled step setting. It is extremely convenient to install and use. Save customers the replacement step and mold change debugging time.

Products:

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.