Engineering Machinery Epoxy Primer Water Borne Paint

Water borne paint for Engineering Machinery

Cooperation Client Directory:Zoomlion；SANY；XCMG

Advantages: High performance; Low VOCs

Product Specification

1. Type: High adhesion epoxy primer

• Product introduction

High adhesion epoxy primer hh3012a, is a new generation of two-component high adhesion epoxy primer coating developed by Haorisen Coatings (Shanghai) Co., Ltd .; low solvent content, no lead, cadmium, chromium, mercury For heavy metals, the paint film has the characteristics of good adhesion, good flexibility, and excellent corrosion resistance; this series of products can be coated on the surface of more metal substrates.

Scope of application

The product is mainly used for metal materials and surface-treated metal substrate surfaces.

Technical index

3.1 Technical Specifications of Original Paint

Fourth, the construction process parameters

1.Applicable substrate: metal material and surface treated metal substrate surface.

Matching ratio

3.Suitable construction environment temperature and humidity: temperature 10-35 ℃, humidity 30-70% rh.

4.Substrate treatment: No oil and dust particles on the substrate.

5.Applicable construction methods: mixed air spray, air spray, airless spray.

6.Flash drying time: 5-10min / room temperature.

7, curing conditions: self-drying at room temperature / 65 ℃ * 20min.

8.Personnel protection: Construction personnel need to wear labor protection supplies.

• Precautions

1.Using cleaning agents can be used for appliance cleaning.

2.It is harmful to human health after inhalation. Please take safety measures during construction., storage, packaging and transportation

This product is a high solid coating, dangerous goods; prevent direct sunlight during transportation; packaging in 200l, 50l, 20l, 10l iron drums; keep the drums clean and hygienic during transportation and storage, and avoid carrying them into the drums during the feeding process. Dirt; if the packaging is damaged, you need to re-check the quality of the products in it.The products should be stored indoors, kept ventilated and dry to prevent freezing and overheating. The storage temperature should be controlled at 5 ~ 35 ℃. If the storage period is exceeded, the experiment should be used to determine whether it can continue to be used.

2. Type: High solid polyurethane topcoat

一,Product introduction

High solid polyurethane gray topcoat hj3417a, is a new generation of two-component high solid polyurethane coatings developed by Hao Lisen Coatings (Shanghai) Co., Ltd. Good adhesion, good flexibility, good weather resistance, etc .; has excellent decoration and protection.

Scope of application

The product is mainly used for epoxy primer surface.

二,Technical index

3.1 Technical Specifications of Original Paint

三, the construction process parameters

1.Applicable substrate: epoxy primer surface.

Matching ratio

3.Suitable construction environment temperature and humidity: temperature 10-35 ℃, humidity 30-70% rh.

4.Substrate treatment: No oil and dust particles on the substrate.

5.Applicable construction methods: mixed air spray, air spray, airless spray.

6.Flash drying time: 10min

7, curing conditions: self-drying at room temperature / 70 ℃ * 30min.

8.Personnel protection: Construction personnel need to wear labor protection supplies.

五,Precautions

1.Using cleaning agents can be used for appliance cleaning.

2.It is harmful to human health after inhalation. Please take safety measures during construction.

六, storage, packaging and transportation

This product is a high solid coating, dangerous goods; prevent direct sunlight during transportation; packaging in 200l, 50l, 20l, 10l iron drums; keep the drums clean and hygienic during transport and storage, and avoid carrying the Dirt; if the packaging is damaged, you need to re-check the quality of the products in it.The products should be stored indoors, kept ventilated and dry to prevent freezing and overheating. The storage temperature should be controlled at 5 ~ 35 ℃. If the storage period is exceeded, the experiment should be used to determine whether it can continue to be used.

3. Type: Polyaspartic acid ester topcoat

一,Product introduction

Poly aspartic acid ester topcoat, composed of a new type of polyaspartic acid ester resin and isocyanate curing agent and various anti-corrosive fillers and additives. High solid content, excellent adhesion to different primers It can be cured normally at low temperature of -10 ℃. No baking, energy saving, low construction VOCs, and meet the green coating standards.

二,Scope of application

The product is mainly used on primed metal materials.

三, performance technical indicators

3.1 Technical Specifications of Original Paint

3.2 Composite Coating Performance Technical Index

四,Construction process parameters

1.Applicable substrate: metal substrate after applying different primers.

Matching ratio

3.Suitable construction environment temperature and humidity: temperature 5-35 ℃, humidity 45-85% rh.

4.Substrate treatment: No oil and dust particles on the substrate.

5.Applicable construction methods: air spray, air-mix spray, airless spray, electrostatic spray.

6.Products with different drying speeds can be designed according to the customer's construction needs.

7.Personnel protection: Construction personnel need to wear labor protection supplies.

五,Precautions

1.Using cleaning agents can be used for appliance cleaning.

3.It is harmful to human health after inhalation. Please take safety measures during construction.

六, storage, packaging and transportation

Avoid direct sunlight during transportation and avoid freezing (> 5 ℃); packaging is 200l, 50l, 20l, 10l plastic drums or iron drums; keep the drums clean and hygienic during transportation and storage, and avoid carrying them into the drums during the feeding process If the packaging is damaged, you need to re-check the quality of the products.The products should be stored indoors, kept ventilated and dry to prevent freezing and overheating. The storage temperature should be controlled at 5 ~ 35 ℃. From the date of storage beyond the expiration date, it should be experimentally determined whether it can be continued to use.

Since its foundation in November 2003, HAOLISEN has been adhering to the vision of “Advocator and Innovator of Waterborne Coating Solutions” and committed to the development and production of industrial electrophoretic coatings by investing lots of human, material, energy and financial resources over more than a decade.

By 2009, HAOLISEN has become theinfluential and famous brand manufacturer of electrophoretic coatings in China. With its constant pursuit of innovation, HAOLISEN persists in scientific research and innovation in order to better create values for the society and provide customers with higher quality products and service as well as efficient coating solutions. HAOLISEN is committed to maintain the absolute leadership of its core technology in the industry, which endows us with honourable social responsibilities.

HLS's development​：

2003 HLS Coating (Shanghai) Co., Ltd. was established.

2005 Its sales volume exceeded 100 million RMB.

2008 It transformed the white goods industry, and was rated as “Excellent Supplier” by Haier, Midea, etc.It​ created the E+P coating process system for oil heaters in domestic household appliance industry.

2009 It created the E+P coating process system for radiators in domestic household industry.

2010 Its white and colored high-end electrophoretic coatings account for a market share of 90% in China.

2012 It established HLS Chemical Technology (Jiangsu) Co., Ltd. in Nantong of Jiangsu Province.

2013 Its upgraded high-performance electrophoretic coating products have been highly recognized by the​ automobile manufacturing industry, and obtained the technical accreditation certificates for basic

automobile materials of China FAW Group, Chang'anAutomobile Group, Dongfeng Automobile, Volvo

and other auto makers.

2014 It has registered in EU and Japan and established its overseas business division, and is now going​ global.

2015 Through cooperating with Fudan University, it has established “Joint Research Center of New

Waterborne Surface Treatment Materials”It has been recognized by Sany Group for waterborne

industrial coating materials.

2016 China's first book of industry technology compiled by a company - Modern E-Coating Encyclopedia

2017 SAIC Volkswagen's certification for electrophoretic coating and its supply thereto; Foton's certification​ for water-based automotive topcoat and its supply thereto; hosted "Gather to Paint Common Prosperity- Surface Finishing Total Solutions Forum".

2018 HLS Chemical Technology (Jiangsu) Co., Ltd. went into operation.

2020 It is certified by SAIC-GM and can be supplied to SAIC-GM system