Low VOCs Engineering Machinery Waterborne Epoxy Paint

Water borne paint for Engineering Machinery

Cooperation Client Directory:Zoomlion；SANY；XCMG

Advantages: High performance; Low VOCs

Product Specification

1. Type: Two-component waterborne epoxy primer

Product introduction

dwp1050 series two-component waterborne epoxy primer is a new generation of two-component waterborne epoxy primer developed by Haorisen Coatings (Shanghai) Co., Ltd .; low solvent content, does not contain lead, cadmium, chromium, mercury and other heavy metals. The paint film has the characteristics of good adhesion and flexibility; this series of products have excellent anti-corrosion performance; it is suitable for different metal plates.

Scope of application

The product can be directly attached to the metal substrate; its upper coating is usually a matching water-based topcoat.

• Technical index

3.1 Technical Specifications of Original Paint

Note: 1. gb is the national standard.

2.The above technical indicators and use method requirements may be different or incomplete in the project, inspection method and performance indicators.

Fourth, the construction process parameters

1.Applicable substrate: metal substrate.

Matching ratio

3.Suitable construction environment temperature and humidity: temperature 10-35 ℃, humidity 30-80% rh.

4.Substrate treatment: No oil and dust particles on the substrate.

5.Applicable construction methods: airless spray, air spray, electrostatic spray.

6, calm time: 8-15min / 10-35 ℃.

7, curing conditions: 60-80 ℃ / 20-40min (workpiece holding time).

8.Personnel protection: Construction personnel need to wear labor protection supplies.

• Precautions

1.Utensils can be cleaned with dilute ammonia solution or matching cleaning agents.

2.It is harmful to human health after inhalation. Please take safety measures during construction.

六, storage, packaging and transportation

This product is water-based paint, non-dangerous, non-flammable and explosive; prevent direct sunlight and avoid freezing during transportation (> 5 ℃); packaging is 200l, 50l, 20l, 10l plastic drum or iron drum; transportation and storage The packaging barrel should be kept clean and hygienic to avoid the dirt brought into the packaging barrel during the feeding process; if the packaging is damaged, the quality of the products in it should be re-checked. The products should be stored indoors, kept ventilated and dry to prevent freezing. And overheating, the storage temperature should be controlled at 5 ~ 35 ° C. Since the date of production, the product exceeds the storage period, and it should be determined by experiments whether it can continue to be used.

2. Type: Two-component waterborne polyurethane topcoat

• Product introduction

dwp2050 series two-component water-based polyurethane topcoat is a new generation of two-component water-based environmental protection topcoat developed by Haorisen Coatings (Shanghai) Co., Ltd. It has the characteristics of good adhesion and good flexibility; this series of products can be adjusted with various effects and colors to meet the needs of different product designs; it has excellent decoration and protection.

Scope of application

The product is mainly used for waterborne epoxy primer / intermediate primer.

• Technical index

3.1 Technical Specifications of Original Paint

Note: 1. gb is the national standard.

2.The above technical indicators and use method requirements may be different or incomplete in the project, inspection method and performance indicators.

Fourth, the construction process parameters

1.Applicable substrate: metal substrate after applying primer / intermediate paint.

Matching ratio

3.Suitable construction environment temperature and humidity: temperature 10-35 ℃, humidity 30-80% rh.

4.Substrate treatment: No oil and dust particles on the substrate.

5.Applicable construction methods: airless spray, air spray, electrostatic spray.

6, calm time: 8-15min / 10-35 ℃.

7, curing conditions: 60-80 ℃ / 20-40min (workpiece holding time).

8.Personnel protection: Construction personnel need to wear labor protection supplies.

• Precautions

1.Utensils can be cleaned with dilute ammonia solution or matching cleaning agents.

2.It is harmful to human health after inhalation. Please take safety measures during construction.

Since its foundation in November 2003, HAOLISEN has been adhering to the vision of “Advocator and Innovator of Waterborne Coating Solutions” and committed to the development and production of industrial electrophoretic coatings by investing lots of human, material, energy and financial resources over more than a decade.

By 2009, HAOLISEN has become theinfluential and famous brand manufacturer of electrophoretic coatings in China. With its constant pursuit of innovation, HAOLISEN persists in scientific research and innovation in order to better create values for the society and provide customers with higher quality products and service as well as efficient coating solutions. HAOLISEN is committed to maintain the absolute leadership of its core technology in the industry, which endows us with honourable social responsibilities.

HLS's development​：

2003 HLS Coating (Shanghai) Co., Ltd. was established.

2005 Its sales volume exceeded 100 million RMB.

2008 It transformed the white goods industry, and was rated as “Excellent Supplier” by Haier, Midea, etc.It​ created the E+P coating process system for oil heaters in domestic household appliance industry.

2009 It created the E+P coating process system for radiators in domestic household industry.

2010 Its white and colored high-end electrophoretic coatings account for a market share of 90% in China.

2012 It established HLS Chemical Technology (Jiangsu) Co., Ltd. in Nantong of Jiangsu Province.

2013 Its upgraded high-performance electrophoretic coating products have been highly recognized by the​ automobile manufacturing industry, and obtained the technical accreditation certificates for basic

automobile materials of China FAW Group, Chang'anAutomobile Group, Dongfeng Automobile, Volvo

and other auto makers.

2014 It has registered in EU and Japan and established its overseas business division, and is now going​ global.

2015 Through cooperating with Fudan University, it has established “Joint Research Center of New

Waterborne Surface Treatment Materials”It has been recognized by Sany Group for waterborne

industrial coating materials.

2016 China's first book of industry technology compiled by a company - Modern E-Coating Encyclopedia

2017 SAIC Volkswagen's certification for electrophoretic coating and its supply thereto; Foton's certification​ for water-based automotive topcoat and its supply thereto; hosted "Gather to Paint Common Prosperity- Surface Finishing Total Solutions Forum".

2018 HLS Chemical Technology (Jiangsu) Co., Ltd. went into operation.

2020 It is certified by SAIC-GM and can be supplied to SAIC-GM system